One-pot Ugi-azide and Heck reactions for the synthesis of heterocyclic systems containing tetrazole and 1,2,3,4-tetrahydroisoquinoline

• Jiawei Niu,
• Yuhui Wang,
• Shenghu Yan,
• Yue Zhang,
• Xiaoming Ma,
• Qiang Zhang and
• Wei Zhang

Beilstein J. Org. Chem. 2024, 20, 912–920, doi:10.3762/bjoc.20.81

• tetrazolyl-1,2,3,4-tetrahydroisoquinoline 8a in 74% isolated yield which is higher than the one-pot Ugi/Hecke reaction to give product 6b (58%). Under the alternative one-pot reaction conditions involving an N-alkylation step, the substrate scope was explored by the preparation of 10 derivatives 8a–j (Scheme

• scalability of the two-step one-pot reaction protocol, we performed the synthesis of tetracyclic tetrazolo-pyrazino[2,1-a]isoquinolin-6(5H)-one 6c in gram quantity from 10 mmol of 1a which led to the formation of product 6c in a satisfactory yield 77% (Scheme 6). The products 6 and 8 were characterized by 1H

• . The initial Ugi-azide four-component reaction constructs the tetrazole motif while the subsequent intramolecular Heck reaction assembles the tetrahydroisoquinoline. The one-pot reaction avoids the intermediate purification which has favorable PASE in the synthesis of heterocyclic compounds

Regioselective quinazoline C2 modifications through the azide–tetrazole tautomeric equilibrium

• Dāgs Dāvis Līpiņš,
• Andris Jeminejs,
• Una Ušacka,
• Anatoly Mishnev,
• Māris Turks and
• Irina Novosjolova

Beilstein J. Org. Chem. 2024, 20, 675–683, doi:10.3762/bjoc.20.61

• -pot reaction was performed by adding sodium 4-methylphenylsulfinate in the first step which was followed by NaN3. As the result, the formation of hydrolysis product 5a and 2,4-diazidoquinazoline (6a) was observed. Next, the reaction 1a → 4a in DMSO yielded diazidoquinazoline 6a as a major product and

• first attempts in iPrOH did not provide the starting material conversion. The reaction in THF resulted in the full conversion of the starting material, but the analysis of the crude product revealed the quantitative formation of hydrolysis product 5a. Assuming the instability of intermediate 2a, a one

Facile approach to N,O,S-heteropentacycles via condensation of sterically crowded 3H-phenoxazin-3-one with ortho-substituted anilines

• Eugeny Ivakhnenko,
• Vasily Malay,
• Pavel Knyazev,
• Nikita Merezhko,
• Nadezhda Makarova,
• Oleg Demidov,
• Gennady Borodkin,
• Andrey Starikov and
• Vladimir Minkin

Beilstein J. Org. Chem. 2024, 20, 336–345, doi:10.3762/bjoc.20.34

• -di-tert-butyl-2-(arylamino)-3H-phenoxazin-3-ones 4. 6,8-Di-tert-butyl-2-(arylamino)-3H-phenoxazin-3-ones 4 prepared by the one-pot reaction between 6,8-di-tert-butyl-3H-phenoxazin-3-one (1) and aromatic amines 2b (the yield is given in parentheses). Synthesis of 14H-quinoxaline[2,3-b]phenoxazines 5

Perspectives on push–pull chromophores derived from click-type [2 + 2] cycloaddition–retroelectrocyclization reactions of electron-rich alkynes and electron-deficient alkenes

• Michio Yamada

Beilstein J. Org. Chem. 2024, 20, 125–154, doi:10.3762/bjoc.20.13

• one-pot reaction involving TCNE and one equivalent of 3-(4-(dimethylamino)phenyl)propionitrile in toluene at 90 °C for 24 h. Subsequently, one equivalent of 1 was added at 90 °C for 24 h (Scheme 6) [101]. While the separation of the isomers was not achieved, the structure of the 3Z,5E isomer was

Synthesis of N-acyl carbazoles, phenoxazines and acridines from cyclic diaryliodonium salts

• Nils Clamor,
• Mattis Damrath,
• Thomas J. Kuczmera,
• Daniel Duvinage and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2024, 20, 12–16, doi:10.3762/bjoc.20.2

• , this new method creates two C–N bonds simultaneously based on a mono-halogenated starting material, thus allowing heterocycle formation with diminished halogen waste. Keywords: carbazoles; heteroaromatics; iodanes; metal-catalyzed; one-pot reaction; Introduction N-Acyl carbazoles are effective

Recent advancements in iodide/phosphine-mediated photoredox radical reactions

• Tinglan Liu,
• Yu Zhou,
• Junhong Tang and
• Chengming Wang

Beilstein J. Org. Chem. 2023, 19, 1785–1803, doi:10.3762/bjoc.19.131

• the construction of various nitrogen-containing polycyclic frameworks (36, 38, 39, 41) (Scheme 17) [32][33][34]. These protocols offered a wide range of substrate compatibility in a one-pot reaction, significantly enhancing synthetic efficiency. Nitrogen-containing heterocycles are abundantly found in

Decarboxylative 1,3-dipolar cycloaddition of amino acids for the synthesis of heterocyclic compounds

• Xiaofeng Zhang,
• Xiaoming Ma and
• Wei Zhang

Beilstein J. Org. Chem. 2023, 19, 1677–1693, doi:10.3762/bjoc.19.123

• maleimides in MeCN at 110 °C for 6 h afforded the corresponding monocycloaddition compounds followed by acylation to yield intermediates 22. The subsequent sequential Staudinger/aza-Wittig reaction of intermediates 22 gave products 23a–g in 48–75% yields with 5:1 to 6:1 dr (Scheme 14). This one-pot reaction

Tying a knot between crown ethers and porphyrins

• Maksym Matviyishyn and
• Bartosz Szyszko

Beilstein J. Org. Chem. 2023, 19, 1630–1650, doi:10.3762/bjoc.19.120

• notable distinction as they could readily undergo oxidation to yield the corresponding crownphyrins 28–33, incorporating a dipyrrin unit. The synthetic pathway towards crownphyrins is straightforward and relies on a one-pot reaction between diformyldipyrromethane 20a/b and a diamine which introduces the

One-pot nucleophilic substitution–double click reactions of biazides leading to functionalized bis(1,2,3-triazole) derivatives

• Hans-Ulrich Reissig and
• Fei Yu

Beilstein J. Org. Chem. 2023, 19, 1399–1407, doi:10.3762/bjoc.19.101

• substituent undergo a one-pot reaction with reasonable efficiency and furnished the expected 1,2,3-triazole derivative 7 in 61% yield under the approved conditions. Next, we turned our attention to the generation of divalent systems, starting with the reactions of 1,3- (8) and 1,2-bis(bromomethyl)benzene (11

• . One-pot reaction employing enantiopure alkynyl-substituted 1,2-oxazin-4-one derivative 6 leading to 1,2,3-triazole 7. One-pot reactions of dihalides 8 and 11 with sodium azide and alkyne 2 leading to symmetric divalent bis(1,2,3-triazoles) 9 and 12 as major products. One-pot reactions employing

• enantiopure alkynyl-substituted 1,2-oxazin-4-one derivative 6 leading to bis(1,2,3-triazoles) 14 and 17 as major products. One-pot reaction employing enantiopure alkynyl-substituted 1,2-oxazin-4-ol derivative 19 leading to bis(1,2,3-triazoles) 20 and 21. Reductive ring-openings of 1,2-oxazine derivatives 19

Unravelling a trichloroacetic acid-catalyzed cascade access to benzo[f]chromeno[2,3-h]quinoxalinoporphyrins

• Chandra Sekhar Tekuri,
• Pargat Singh and
• Mahendra Nath

Beilstein J. Org. Chem. 2023, 19, 1216–1224, doi:10.3762/bjoc.19.89

• ; multicomponent synthesis; one-pot reaction; trichloroacetic acid; Introduction π-Conjugated porphyrin macrocycles are known for their applications in numerous areas ranging from oxygen transport, photosynthesis, catalysis and medicine [1][2][3]. In the past several years, diverse organic scaffolds have been

Photoredox catalysis harvesting multiple photon or electrochemical energies

• Mattia Lepori,
• Simon Schmid and
• Joshua P. Barham

Beilstein J. Org. Chem. 2023, 19, 1055–1145, doi:10.3762/bjoc.19.81

• products (e.g., 7) whereas irradiation with blue light (λ = 455 nm) provided disubstituted products 8 (Figure 5A). Additionally, adding a different trapping reagent before switching from green to blue light allows for a sequential and controlled substitution in a one-pot reaction (Figure 5B). 2,4,6

An efficient metal-free and catalyst-free C–S/C–O bond-formation strategy: synthesis of pyrazole-conjugated thioamides and amides

• Shubham Sharma,
• Dharmender Singh,
• Sunit Kumar,
• Vaishali,
• Rahul Jamra,
• Naveen Banyal,
• Deepika,
• Chandi C. Malakar and
• Virender Singh

Beilstein J. Org. Chem. 2023, 19, 231–244, doi:10.3762/bjoc.19.22

• for the construction of biologically interesting highly diversified pyrazole-linked thioamide and amide conjugates has been developed. The pyrazole C-3/4/5-tethered thioamide conjugates were prepared via a one-pot reaction between highly diversified pyrazole carbaldehydes, cyclic secondary amines, and

Sequential hydrozirconation/Pd-catalyzed cross coupling of acyl chlorides towards conjugated (2E,4E)-dienones

• Benedikt Kolb,
• Daniela Silva dos Santos,
• Sanja Krause,
• Anna Zens and
• Sabine Laschat

Beilstein J. Org. Chem. 2023, 19, 176–185, doi:10.3762/bjoc.19.17

• substituents in the one-pot reaction and showed that regardless of the substitution pattern, the reactions lead to the stereoselective formation (≥95% (2E,4E)) of the respective dienones under mild conditions. It was found that enynes with alkyl chains gave higher yields than the corresponding aryl-substituted

A novel bis-triazole scaffold accessed via two tandem [3 + 2] cycloaddition events including an uncatalyzed, room temperature azide–alkyne click reaction

• Ksenia Malkova,
• Andrey Bubyrev,
• Vasilisa Krivovicheva,
• Dmitry Dar’in,
• Alexander Bunev and
• Mikhail Krasavin

Beilstein J. Org. Chem. 2022, 18, 1636–1641, doi:10.3762/bjoc.18.175

• intermediate before the click reaction was established by 1H NMR analysis of the reaction mixture). However, the product of this two-step, one-pot reaction (19) was isolated in respectable 61% yield. The structure of compound 19 was confirmed by the single-crystal X-ray analysis which demonstrated that the

One-pot double annulations to confer diastereoselective spirooxindolepyrrolothiazoles

• Juan Lu,
• Bin Yao,
• Desheng Zhan,
• Zhuo Sun,
• Yun Ji and
• Xiaofeng Zhang

Beilstein J. Org. Chem. 2022, 18, 1607–1616, doi:10.3762/bjoc.18.171

• (Table 1, entries 2–4) superior to 86% yield for 3 h (Table 1 entry 1), and followed by decarboxylative [3 + 2] cycloaddition with the second equivalent of compound 1a and olefinic oxindole 4a under reflux heating for 12 h. It indicates that the one-pot reaction process with EtOH and iPrOH afforded the

• spirooxindolepyrrolothiazole analogues 5a–d with 49–70% isolated yield (Scheme 3) under the optimized reaction conditions (Table 1, entry 7). Compounds 5b–d with using heteroaromatic aldehydes resulted in lower yield than 5a. In addition, according to the one-pot reaction process (Table 1, entry 5) with two operational steps

• (0.5 M), 90 °C, 9 h (Table 1, entry 6). iii) 2.2:1.1:1.0 of 1a/2/4a, EtOH (0.5 M), 90 °C, 9 h (Table 1, entry 7). Optimization of reaction conditions for double annulations of cysteine.a One-pot reaction for the synthesis of compound 7. Green metrics (AE, AEf, CE, RME, OE and MP) analysis for processes

Synthesis of novel alkynyl imidazopyridinyl selenides: copper-catalyzed tandem selenation of selenium with 2-arylimidazo[1,2-a]pyridines and terminal alkynes

• Mio Matsumura,
• Kaho Tsukada,
• Kiwa Sugimoto,
• Yuki Murata and
• Shuji Yasuike

Beilstein J. Org. Chem. 2022, 18, 863–871, doi:10.3762/bjoc.18.87

• activity of the compounds obtained via this synthesis route. Conclusion In this study, the synthesis route for novel alkynyl imidazopyridinyl selenides using the Cu-catalyzed one-pot reaction of Se powder with imidazo[1,2-a]pyridines and terminal alkynes was developed. A variety of desired compounds was

• reactions. Transformation from 4aa. One-pot reaction of Se powder with 1a and 3aa. One-pot two-step synthesis of alkynyl imidazopyridinyl selenides 4a. Supporting Information Supporting Information File 76: Characterization data of all new compounds, synthetic procedures for compounds 6–8, X-ray

• -pot reaction, both selanyl groups from the diselenide transferred to the product 4aa. When no base was added or the amount of the base was reduced, the yield of 4aa decreased significantly (Table 1, entries 9 and 10). Moreover, increasing the amount of the alkyne 1a or Na2CO3 did not affect the

Copper-catalyzed multicomponent reactions for the efficient synthesis of diverse spirotetrahydrocarbazoles

• Shao-Cong Zhan,
• Ren-Jie Fang,
• Jing Sun and
• Chao-Guo Yan

Beilstein J. Org. Chem. 2022, 18, 796–808, doi:10.3762/bjoc.18.80

• underwent a [4 + 2] cycloaddition reaction (reaction 1 in Scheme 1) [69][70][71][72][73][74]. This metal-catalyzed one-pot reaction not only combined the advantages of a traditional Diels–Alder reaction and the recently developed multicomponent reactions, but also meets the goal of green and sustainable

Heteroleptic metallosupramolecular aggregates/complexation for supramolecular catalysis

• Prodip Howlader and
• Michael Schmittel

Beilstein J. Org. Chem. 2022, 18, 597–630, doi:10.3762/bjoc.18.62

• advantages of utilizing self-assembly to construct discrete nanocages with predetermined geometry and function is the use of a one-pot reaction employing complementary organic linkers with inorganic metal ions. Although the one-pot synthesis of homoleptic metallacages has been thoroughly investigated over

• -bonding, which would lead to catalytic quenching, a unique design strategy was applied. Instead of using a cis-blocked palladium(II) unit for self-assembly, Pd(NO3)2 was employed along with the triazole-based 0° clip 13. In a one-pot reaction, 12 and 13 in DMSO were treated with Pd(NO3)2 in a 1:1:1 ratio

• reside inside the sphere (Figure 7). In order to vary the local gold concentration inside the cavity, heteroleptic cages were assembled from a multicomponent one-pot reaction of Pd(II) with 30 and the analogous non-functionalized ligand 31. By controlling the ratio of 30 and 31, spheres with varying

Syntheses of novel pyridine-based low-molecular-weight luminogens possessing aggregation-induced emission enhancement (AIEE) properties

• Masayori Hagimori,
• Tatsusada Yoshida,
• Yasuhisa Nishimura,
• Yukiko Ogawa and
• Keitaro Tanaka

Beilstein J. Org. Chem. 2022, 18, 580–587, doi:10.3762/bjoc.18.60

• . pyrido[1,2-a]pyrrolo[3,4-d]pyrimidines 3a,b and N-methyl-4-((pyridin-2-yl)amino)maleimides 4a–e, were selectively prepared by a one-pot reaction between a functionalized maleimide and 2-aminopyridines with electron-donating or electron-withdrawing groups at position 5 and were investigated

• the electronic nature of the compounds with and without AIEE properties. Keywords: acceptor–donor–acceptor; AIEE; low molecular weight; one-pot reaction; ((pyridin-2-yl)amino)maleimide; TD-DFT calculation; Introduction Fluorescent compounds have attracted considerable attention as functional

• study, we used 1-methyl-4-(methylsulfanyl)-2,5-dioxo-2,5-dihydro-1H-pyrrole-3-carbonitrile (1) with a methylsulfanyl group as a good leaving group. As shown in Scheme 1, the one-pot reaction of 1 with 2-aminopyridine (2a) proceeded by refluxing in ethanol for 2 h to produce the ring-fused pyridine

Tosylhydrazine-promoted self-conjugate reduction–Michael/aldol reaction of 3-phenacylideneoxindoles towards dispirocyclopentanebisoxindole derivatives

• Sayan Pramanik and
• Chhanda Mukhopadhyay

Beilstein J. Org. Chem. 2022, 18, 469–478, doi:10.3762/bjoc.18.49

• and operational simplicity through one pot reaction. Keywords: chemoselective conjugate reduction; dispirocyclopentanebisoxindole scaffolds; metal-free; one-pot operation; reductive cyclization; Introduction There is a vast demand of the structurally complex spirooxindole scaffold which is an

Recent developments and trends in the iron- and cobalt-catalyzed Sonogashira reactions

• Surendran Amrutha,
• Sankaran Radhika and
• Gopinathan Anilkumar

Beilstein J. Org. Chem. 2022, 18, 262–285, doi:10.3762/bjoc.18.31

• cross-coupling reactions Homogeneous green protocols Tsai et al. discussed an efficient, simple and environmentally friendly method for the coupling of arylynols 3 with an aryl halide [21]. This strategy discloses a one pot reaction catalyzed by FeCl3 in an aqueous medium associated with the cationic

Bifunctional thiourea-catalyzed asymmetric [3 + 2] annulation reactions of 2-isothiocyanato-1-indanones with barbiturate-based olefins

• Jiang-Song Zhai and
• Da-Ming Du

Beilstein J. Org. Chem. 2022, 18, 25–36, doi:10.3762/bjoc.18.3

• the basic reaction conditions (Scheme 5b). A one-pot reaction of three available starting materials was tested using CH2Cl2 as the solvent. The one-pot reaction of 1,3-dimethylbarbituric acid (6), benzaldehyde (7), and 2-isothiocyanato-1-indanone (1a) proceeded smoothly to provide the desired product

• 3aa in 80% yield with 95% ee and >20:1 dr (Scheme 6a). In addition, the one-pot reaction of 1,3-dimethylbarbituric acid (6), m-bromobenzaldehyde (8), and 2-isothiocyanato-1-indanone (1a) was also investigated, and the reaction yield (80%) was lower than before, but the stereoselectivity (>20:1 dr, >99

N-Sulfinylpyrrolidine-containing ureas and thioureas as bifunctional organocatalysts

• Viera Poláčková,
• Dominika Krištofíková,
• Boglárka Némethová,
• Renata Górová,
• Mária Mečiarová and
• Radovan Šebesta

Beilstein J. Org. Chem. 2021, 17, 2629–2641, doi:10.3762/bjoc.17.176

• after each step prompted us to apply a Mitsunobu and Staudinger reaction for the preparation of amine 2 (Scheme 1) [33]. This one-pot reaction gave the desired amine 2 in 56% yield. Then, the corresponding isothiocyanate 3a was prepared by reaction of amine 2 with CS2 and DCC according to the reported

Efficient synthesis of polyfunctionalized carbazoles and pyrrolo[3,4-c]carbazoles via domino Diels–Alder reaction

• Ren-Jie Fang,
• Chen Yan,
• Jing Sun,
• Ying Han and
• Chao-Guo Yan

Beilstein J. Org. Chem. 2021, 17, 2425–2432, doi:10.3762/bjoc.17.159

• diastereoisomers of tetrahydropyrrolo[3,4-c]carbazoles, which can be dehydrogenated by DDQ oxidation in acetonitrile at room temperature to give the aromatized pyrrolo[3,4-c]carbazoles in high yields. On the other hand, the one-pot reaction of 3-(indol-3-yl)-1,3-diphenylpropan-1-ones with chalcones or

• scope of this domino Diels–Alder reaction, another kind of 3-vinylindoles was employed in the one-pot reaction. First, the 3-(indol-3-yl)-1,3-diphenylpropan-1-ones prepared through Friedel–Crafts alkylation of indole with chalcones, were oxidized by DDQ in acetonitrile to generate in situ the expected

Recent advances in the syntheses of anthracene derivatives

• Giovanni S. Baviera and
• Paulo M. Donate

Beilstein J. Org. Chem. 2021, 17, 2028–2050, doi:10.3762/bjoc.17.131

• 2012, Singh and co-workers performed green syntheses of oxa-aza-benzo[a]anthracene and oxa-aza-phenanthrene derivatives 151 and 152 via a sequential one-pot reaction in an aqueous micellar system (Scheme 34) [68]. This methodology comprised reactions of isoquinoline (147), phenacyl bromides 148 bearing